UU1315 POWER SUPPLY CUM BATTERY CHARGER

Specifications

PARAMETERS

CONDITIONS

INPUT

Voltage Range

170V to 270VAC

Phase

Single Phase ( Line, Neutral and Earth )

Frequency

47Hz to 53Hz

Efficiency

>75% @ 230VAC Input, Full load

RADIO OUTPUT

Voltage

13.5V ± 0.2V,

Current

15A ( 203W max.)

Line & Load Regulation

<2% (without battery connected)

Ripple ( 0 ~ 20MHz bandwidth)

< 1% ( with 10uF & 0.1uF across the measuring point )

Noise ( 0 ~ 20MHz bandwidth )

< 2% ( with 10uF & 0.1uF across the measuring point )

Over Voltage Protection

P.S.U. trips above 15V and resumes normal operation after input power recycling.

Over Load / Short Circuit Protection

Output folds back or goes in to 'Hickup' mode, if the current exceeds 110% of the rated current.

CHARGER OUTPUT

Voltage

13.5V ± 0.2V ( will follow radio output setting, when battery is connected will follow battery voltage).

Current

7A ( Radio current <8.0A)

Battery deep discharge cut-off

Cut-off <10.8V, Reconnect >11.4

Battery reverse protection

Battery is Cut-off from the output and a audiable alarm is activated

INDICATIONS

Output ON

Indicates ‘ Output is Available’

Battery ON

Indicates ‘ Battery is supplying power to Radio’.

Battery Low

Indicates ‘ Battery is low and it is isolated from Radio’.

Trickle Charge

Indicates ‘ Battery is fully charged’.

ENVIRONMENT

Operating Temperature

0º C to +50º C

Storage Temperature

0º C to +60º C

Relative Humidity

10% to 95% RH

GENERAL

Isolation Voltage

1.5KV for 1minute with leakage current <5mA. a) Between Input and Output. b) Between Input and Chassis.

Mechanical Dimensions

Depth = 201mm, Width = 184mm, Height = 76mm.

Weight

2.5 Kgs.